A complementary metal-oxide-semiconductor (CMOS) chip biosensor was developed for cell viability monitoring based on an array of capacitance sensors utilizing a ring oscillator. The chip was packaged in a low temperature co-fired ceramic (LTCC) module with a flip chip bonding technique. A microcontroller operates the chip, while the whole measurement system was controlled by PC. The developed biosensor was applied for measurement of the proliferation stage of adherent cells where the sensor response depends on the ratio between healthy, viable and multiplying cells, which adhere onto the chip surface, and necrotic or apoptotic cells, which detach from the chip surface. This change in cellular adhesion caused a change in the effective permittivity in the vicinity of the sensor element, which was sensed as a change in oscillation frequency of the ring oscillator. The sensor was tested with human lung epithelial cells (BEAS-2B) during cell addition, proliferation and migration, and finally detachment induced by trypsin protease treatment. The difference in sensor response with and without cells was measured as a frequency shift in the scale of 1.1 MHz from the base frequency of 57.2 MHz. Moreover, the number of cells in the sensor vicinity was directly proportional to the frequency shift.
Kilpijärvi Joni, Halonen Niina, Sobocinski Maciej, Hassinen Antti, Senevirathna Bathiya, Uvdal Kajsa, Abshire Pamela, Smela Elisabeth, Kellokumpu Sakari, Juuti Jari, Lloyd Spetz Anita
A1 Journal article – refereed
Place of publication:
Kilpijärvi, J.; Halonen, N.; Sobocinski, M.; Hassinen, A.; Senevirathna, B.; Uvdal, K.; Abshire, P.; Smela, E.; Kellokumpu, S.; Juuti, J.; Lloyd Spetz, A. LTCC Packaged Ring Oscillator Based Sensor for Evaluation of Cell Proliferation. Sensors 2018, 18, 3346. https://doi.org/10.3390/s18103346
Read the publication here: